HZ-WT series horizontal hair removal machine is a horizontal roller type mechanical hair removal machine designed and produced by Haoze Machinery for all kinds of poultry processing enterprises. It is a mature product with high cost performance in hair removal equipment. Praised by the majority of customers.
The main technical parameters
Production capacity: 3000 / hour
Motor power: 8KW
Basic structure and working principle:
1. Rack part:
The four columns are made of φ108×8 seamless steel pipe. The geometrical dimensions of the four fixed channel steels are in line with the national standard. The whole frame is firm and reliable, with good safety and stability.
2. Depilatory roller part:
The rotating roller is made by drilling φ108×4 seamless steel pipe, and the glue stick fixed on the rotating roller is made of nitrile rubber. It is non-toxic and tasteless, has good flexibility and long service life, and ensures the hair removal effect. It also reduces the rate of defects.
3. Transmission system:
The total composition of the depilation roller of the equipment is two rows of upper and lower, which are respectively driven by a vertical motor of 4kw-4. Through the V-belt and the chain transmission, the upper and lower rows of depilation rollers are relatively rotated, thereby achieving the purpose of depilation. The transmission bearing adopts high quality 1207 type self-aligning bearing, which runs smoothly and has low noise.
4. Adjustment system:
The four adjustment screws can increase or decrease the distance between the upper and lower rows of depilation roller assemblies to meet the hair removal needs of ducks of different sizes.
5. Cover part:
The sprocket cover, the motor cover and the upper cover are all bent and welded with a steel plate with δ=1.2, which is firm and reliable, and is beautiful and elegant.
6. Sprinkler system:
It consists of a set of water pipes and fittings. Spraying hot water with a certain temperature not only improves the hair removal effect, but also ensures that the removed feathers are washed away in time.
Test machine and maintenance:
1. Before the machine is tested, the bolts of each part should be checked for looseness. Whether the lubrication parts have been filled with the specified lubricating grease, and the parts can be tested without any problem.
2. When the hair removal machine is working, the motor should be protected from moisture and water. When cleaning the equipment, be careful not to spray water onto the motor.
3, the following parts must be checked and processed frequently
A: Whether the hair removal glue stick is defective, if it is, it should be replaced in time.
B: Whether the motor triangle belt is slack, it should be tightened in time.
C: Check whether there is water in the bearing seat, whether the bearing is damaged or not, check and replace it in time, otherwise it will cause bad chain reaction.
Lubrication and maintenance
Each bearing housing and column sliding sleeve is equipped with oil-filled grease fittings. It should be ensured that the bearings and sliding sleeves are regularly lubricated (wean butter once a week), and the adjusting screw and chain are lubricated with ordinary mechanical oil.