Zhucheng Haoze machinery co., LTD

诸城市浩泽机械有限公司

Poultry slaughtering equipment manufacturers

Poultry slaughtering equipment scientific research, production,

operating as one of the modern enterprise

 

tel

HOT LINE
+86-13964727777

pic
pic
/
/
/
Maintenance precautions for poultry slaughtering equipment

Maintenance precautions for poultry slaughtering equipment

(Summary description)Maintenance of poultry slaughter equipment is important for the production of slaughter lines. The poultry slaughter line will have some normal wear during the production process.

Maintenance precautions for poultry slaughtering equipment

(Summary description)Maintenance of poultry slaughter equipment is important for the production of slaughter lines. The poultry slaughter line will have some normal wear during the production process.

Information
Maintenance of poultry slaughter equipment is important for the production of slaughter lines. The poultry slaughter line will have some normal wear during the production process. Therefore, maintenance is especially critical. The following describes the maintenance methods for the parts of the slaughter line:
 
1. Maintenance method of the head motor:
 
The slaughter line must not be filled with water, as this may cause damage to the motor and affect its use. It also shortens the life of the slaughtering equipment.
 
2, the maintenance method of the chain:
 
The chain of the slaughtering line may cause the original lubricating oil to evaporate after long-term operation, which may cause the chain of the slaughtering line to be unbalanced during operation, increase in noise, and crawl. Add butter or a thicker lubricant to the chain.
 
3. Maintenance and maintenance methods for the slaughter line head reducer:
 
Start using the oil in the gearbox for about three months, clean the inside of the gearbox with diesel or gasoline, and add the new lubricant to the middle of the observation window. It will be fine to change the oil every year in the future. Too much lubricating oil may cause the gearbox to heat up. If the motor load is too large, the motor protection switch will trip. Too little lubricating oil may cause the gearbox to heat up, the noise increases, and the gearbox is hanged and scrapped.

Scan the QR code to read on your phone

 

Zhucheng Haoze machinery co., LTD    鲁ICP备16000764号